At the perimeter and between panels
Trim & Seals
Perimeter angle, end caps and the gasket that closes the joint between panels.
What this group does
The parts that finish the ceiling where it stops. Perimeter angle closes the junction with the wall and carries the cut edge panels; end caps close an open baffle blade so it does not read as a cut section; the rubber gasket fills the joint between hook on panels to give a consistent shadow line.
By system
Which ceilings
take these parts
Clip In Ceiling
- L-shaped Angle
Lay In Ceiling
- L-shaped Angle
Open Cell Ceiling
- L-shaped Angle
Combination Ceiling
- L-shaped Angle
Baffle Ceiling
- End Cap
Hook On Ceiling
- Black Rubber · Fills the gaps between the panels
Other part types
The other
the assembly
Carriers & Runners
The sections the panels attach to. Which one a ceiling takes is decided by the panel type, not by the span.
8 parts
Brackets & Hangers
The pieces between the carrier and the structure above, and the clips that hold a panel to its carrier.
5 parts
Connectors
Splices that join two lengths of carrier into a continuous run.
4 parts
Fixings
What the suspension is anchored with at the slab.
2 partsContact us
Discuss your
project requirements
Talent Building Products supports architects, designers, distributors and contractors with product information, technical guidance and project coordination. Contact our team to request specifications, catalogs, samples or pricing, or to discuss project requirements.
- Address
- 2108 N St Ste 9232, Sacramento, CA 95816
- Phone
- (916) 514-6700
Certified manufacturing
ISO 9001:2015 for quality management, and ISO 14001 for environmental management.