At the soffit
Fixings
What the suspension is anchored with at the slab.
What this group does
The anchor and the drop. Everything above the carrier is these two parts: an expansion screw into the soffit and a threaded suspension bolt down to the bracket. The bolt is also the adjustment, so the ceiling height is set here and fine-tuned at the bracket.
By system
Which ceilings
take these parts
Clip In Ceiling
- Expansion Screw
- Suspension Bolt
Lay In Ceiling
- Expansion Screw
- Suspension Bolt
Baffle Ceiling
- Expansion Screw
- Suspension Bolt
Strip Ceiling
- Expansion Screw
- Suspension Bolt
Open Cell Ceiling
- Expansion Screw
- Suspension Bolt
Hook On Ceiling
- Expansion Screw
- Suspension Bolt
Combination Ceiling
- Expansion Screw
- Suspension Bolt
Other part types
The other
the assembly
Carriers & Runners
The sections the panels attach to. Which one a ceiling takes is decided by the panel type, not by the span.
8 parts
Brackets & Hangers
The pieces between the carrier and the structure above, and the clips that hold a panel to its carrier.
5 parts
Connectors
Splices that join two lengths of carrier into a continuous run.
4 parts
Trim & Seals
Perimeter angle, end caps and the gasket that closes the joint between panels.
3 partsContact us
Discuss your
project requirements
Talent Building Products supports architects, designers, distributors and contractors with product information, technical guidance and project coordination. Contact our team to request specifications, catalogs, samples or pricing, or to discuss project requirements.
- Address
- 2108 N St Ste 9232, Sacramento, CA 95816
- Phone
- (916) 514-6700
Certified manufacturing
ISO 9001:2015 for quality management, and ISO 14001 for environmental management.