Between the suspension bolt and the carrier
Brackets & Hangers
The pieces between the carrier and the structure above, and the clips that hold a panel to its carrier.
What this group does
Brackets carry the load from the carrier up into the suspension, and they are where the ceiling plane is set. Adjusting at the bracket is how a level ceiling is achieved under a slab that is not.
By system
Which ceilings
take these parts
Clip In Ceiling
- Spring Tee Runner Suspension Bracket
- 38# Main Carrier Suspension Bracket
Combination Ceiling
- Spring Tee Runner Suspension Bracket
- 38# Main Carrier Suspension Bracket
Lay In Ceiling
- Suspension Bracket
- 38# Main Carrier Suspension Bracket
Baffle Ceiling
- 38# Main Carrier Suspension Bracket
- Hanger · For the cold-rolled series
Strip Ceiling
- 38# Main Carrier Suspension Bracket
- Hanger · For the cold-rolled series
Open Cell Ceiling
- 38# Main Carrier Suspension Bracket
Hook On Ceiling
- Suspension Clip
Other part types
The other
the assembly
Carriers & Runners
The sections the panels attach to. Which one a ceiling takes is decided by the panel type, not by the span.
8 parts
Connectors
Splices that join two lengths of carrier into a continuous run.
4 parts
Fixings
What the suspension is anchored with at the slab.
2 parts
Trim & Seals
Perimeter angle, end caps and the gasket that closes the joint between panels.
3 partsContact us
Discuss your
project requirements
Talent Building Products supports architects, designers, distributors and contractors with product information, technical guidance and project coordination. Contact our team to request specifications, catalogs, samples or pricing, or to discuss project requirements.
- Address
- 2108 N St Ste 9232, Sacramento, CA 95816
- Phone
- (916) 514-6700
Certified manufacturing
ISO 9001:2015 for quality management, and ISO 14001 for environmental management.